Thermals: Therm-A-Gap® – A574, F574
The 574 Series materials provide superior thermal performance and are softer than the other THERM-A-GAP materials. Their flexible, elastic nature allows them to blanket highly uneven surfaces, drawing away and tranferring heat from components such as microprocessors, video chips and power devices. A574 material consits of an extremely soft silicone elastomer loaded with ceramic particles, coated onto a 5-mil aluminum carrier. The F574 material consists of a ceramic blend filling a fiberglass mesh carrier.
Ordering Information
Standard thicknesses for each of these materials are shown in the Typical Properties page. Pressure-sensitive adhesive is standard on A574 while the F574 material is inherently self-adhering. Standard sheet sizes for flat materials are 9 x 9 in. and 18 x 18 in. Specialty die-cut shapes, and sheet sizes are also available. Contact a K.R. Anderson, Inc. salseman for the solution thats right for you. See Part Number System to construct the appropriate part number.
THERM-A-GAP T174 and T274 materials are available in the following standard thicknesses. T274 material is offered flat or ribbed.
- .040 inches
- .130 inches
- .070 inches
- .160 inches
- .100 inches
- .200 inches
THERM-A-GAP A174, A274 and A574 materials are available in the following standard thicknesses. A274 material is offered flat or ribbed. A574 material is unavailable inches020 inches thickness
- .020 inches flat only
- .130 inches
- .040 inches
- .160 inches
- .070 inches
- .200 inches
- .100 inches
THERM-A-GAP F174 and F574 materials are available in four standard thicknesses shown here, as well as custom thicknesses.
- .020 inches
- .040 inches
- .070 inches
- .100 inches
